Category Full Bore
Shooting Accurately; The Fundamentals of Marksmanship Whether you are shooting pistols or rifles, air or full-bore, there are 4 fundamental principles which must be applied in order to shoot accurately. The best marksmen the world over employ these 4 points… Continue Reading →
Recently I purchased a second hand Accuracy International AT Model Rifle, a rifle which has a factory barrel threaded in 18×1.5mm. This thread is often used with the factory muzzle break, which comes with a clamp back from the thread… Continue Reading →
Last week I went back to Czech Republic with the ‘usual suspects’, FAST Czech Republic consisting of Christian Goblas (Main instructor), Luboš Kulhavý (Instructor), brought together by Froggy (Yves) from full-bore.co.uk. This time hoping to add the third gun to our… Continue Reading →
Preface Me and my partner (Caty) have just got back from a trip to the USA. As I’m always on the look out to shoot things that cannot be owned in the UK, and our tour of the states started… Continue Reading →
How to field strip a Remington 700 Bolt This one is dead simple, it requires no tools and is much easier if you have a coin in your pocket. Remove the bolt from the rifle. Using a shoelace or a… Continue Reading →
As we saw in my eBay Borescope Review, My Krieger Barrel on my RPA Ranger Target Rifle was not in the best of shape, even though after every range outing I had cleaned it “thoroughly” with Forrest Bore Foam, Nylon… Continue Reading →
Whilst cleaning my RPA ranger (RPA Quadlite Actioned Target Rifle) I decided to take the bolt apart for the first time. I’d not done this before on this rifle, and decided to look on the web for a manual or… Continue Reading →
Preface Following on from my Tier One Spartan 3 Moderator Comparison Review – .223 Blanks test a few weeks ago, I finally got chance to get to the range and do some Load Development for my Remington 700 in .223… Continue Reading →
Preface As I write this it is approximately 9 months after this Assault Rifle Training weekend, as such some of the details may be hazy and incorrect, but I’ll try and document what we did as best as I can…. Continue Reading →